By Greg Toope · November 13, 2026 · 5 min read

Photo: site library

New Brunswick covered bridges make a natural theme for a relaxed motorcycle day, but a useful route starts with current locations and access information, not a guessed list or an invented mileage figure. The province presents covered bridges as visitor attractions and maintains transportation and infrastructure information. Use those official sources to choose documented stops, then build and verify the road sequence for the date you intend to ride.

Build the stop list from official information

Begin with New Brunswick Tourism's current destination information and the provincial government's covered-bridge information. Treat those as the source for whether a bridge is listed, where it is located and what the province currently says about it. A map pin, old travel blog or social post may help you discover a name, but it should not replace current official confirmation.

Make a short list rather than trying to collect every bridge in one day. Record each selected bridge's official name, community or location description, source link and any access note. Distinguish a bridge you can visit from one that appears in an inventory but has no confirmed public access or safe stopping area. The presence of a bridge in a list is not by itself evidence that it is open to vehicle traffic, suitable for parking, or available for a photo stop.

This guide does not claim a completed ride or personal visit. It is a planning framework: the official inventory determines which destinations belong on your list, and a current map and road check determine how they fit together.

Connect the stops into a rideable loop

After confirming the stops, place them on a current routing map and compare the actual road connections. Avoid drawing a straight line between bridges and calling it a route. A motorcycle itinerary needs roads a rider can use, realistic transitions between stops and a return plan that does not depend on an unverified shortcut.

For each leg, note the start and finish, the routing source's estimated distance and time, and the date you checked it. Label those numbers as estimates, because routing services can change with closures, construction, traffic settings and chosen route preferences. Add separate time for fuel, food, photographs and the possibility that a bridge stop is inaccessible or busy. Do not present a total distance or riding time as a verified fact until the route has actually been mapped and checked.

Choose one main cluster and one optional extension. That makes it easier to shorten the day if weather turns or a stop is unavailable. If a road approach requires turning around, record that in the plan rather than assuming the bridge can be crossed or passed through.

Verify access and safe stopping

Before departure, check current provincial transportation updates and local visitor information for the roads serving the chosen bridges. An inventory can identify a heritage site, but it does not promise that the approach road is open today or that nearby parking is available. Recheck the route shortly before riding, especially after storms or during roadwork season.

Plan to stop only where it is lawful and safe. Do not block a bridge approach, driveway, farm entrance or travel lane for a photograph. If no safe parking is obvious, admire the structure from a permitted location and continue. A heritage bridge can be narrow, old or subject to restrictions; never ride across it unless current signs and official information clearly permit that use.

For a group ride, agree on a safe regroup point away from the bridge itself. Stagger arrivals if needed, keep the road clear and make sure everyone knows the next stop. A route built around several short visits can be more enjoyable than a rushed attempt to tick off a long list.

Make the ride practical for the day

Give the route a clear start point, a fuel plan and a turnaround time. Confirm fuel availability using current information instead of assuming every small community has open services. Bring water and weather-appropriate layers, and keep a backup plan that removes one or more stops without creating a hurried ride home.

Save the route offline where your navigation device allows it, but do not treat downloaded directions as a live road-closure feed. Carry the official source links or notes for the selected stops so you can distinguish a current access update from an old map label. If signs on site differ from the plan, follow the signs and turn around safely.

The strongest covered-bridge motorcycle itinerary is not necessarily the one with the most stops. It is the one built from confirmed destinations, current roads and honest time estimates, with enough margin to enjoy the places along the way. Once you have selected the bridges and checked the actual route, publish the measured distances as estimates and update them if road access changes.

Start With the Bridge Everyone Comes For

The Hartland Covered Bridge is the reason this route holds together, and it is the one stop where the facts are not in dispute. It is a seven-span Howe truss structure 391 m (1,282 ft) long, it crosses the Saint John River at Hartland, and it is the longest covered bridge still standing anywhere. It is also a National Historic Site, which is why it shows up on every list of New Brunswick attractions rather than only on bridge-enthusiast ones.

Practically, that changes how you ride it. This is a working piece of heritage infrastructure and a tourist stop at the same time, so it is not a place to treat as a photo opportunity at speed. Ride across, park properly on the far side, and walk back if you want the photograph of the whole span, because the only view that shows its length is from off the bridge.

The Route, Leg by Leg

The numbers below are road distances for planning, not surveyed figures, so check them against your own routing before you commit to a day. What matters more than the exact kilometre count is the shape of the loop: get the highway done early, spend the middle of the day on the slower roads, and leave yourself an easy run home.

LegApproximate distanceWhat it is for
Dieppe or Moncton to Frederictonabout 195 km (120 mi) of divided highwayCovering ground fast. No reason to stop, and doing it early means the interesting roads come when you are still fresh.
Fredericton to Hartland along the riverabout 105 km (65 mi) on the slower river roadThe part of the ride worth planning around. River road riding beats the highway for exactly this kind of stop-by-stop route.
Hartland and the surrounding heritage stopsa local loop of roughly 60 to 90 kmWhere you actually spend the middle of the day. Short hops between stops, plenty of places to pull over.
Hartland back to Monctonabout 260 km (160 mi) if you take the direct highway lineThe run home. Plan it in daylight, and do not leave it until the last hour of light.

A full day of this, with real stops and a meal, lands somewhere around 600 to 650 km depending on how much of the local loop you ride. That is a comfortable day on a touring bike and a long one on a sportbike. My Pursuit, at a measured 5.8 L/100 km (40.6 mpg US) loaded, uses roughly 36 L for the day, which at $1.70 a litre is about $61. Slower river-road riding pushes that closer to $70.

What to Verify Before You Go

Heritage infrastructure changes status. A bridge can be closed for repair, re-decked, or moved off the drivable list entirely, and the tourist page that told you about it may not have been updated. Four checks, done the week you plan to ride:

CheckWhere to check itWhy it decides the day
Is the bridge open to vehiclesThe provincial transportation department's current noticesA closed bridge turns a loop into a detour and can add an hour without warning.
Weight and width limitsThe same provincial listing, plus the sign at the approachCovered bridges are old structures. A loaded touring bike with a pillion is heavier than the bike you imagined when you read about it.
Surface conditionRecent visitor reports or a call to the local municipalityWooden decks can be slick when wet and rough when dry. This determines whether you ride across or park and walk.
Parking at the stopSatellite view before you leaveMost of these bridges have no formal parking. Knowing where to leave the bike stops you improvising on someone's driveway.

The honest framing of a covered-bridge ride is that the bridges are short and the riding between them is the day. Anyone who tells you the spans themselves fill an afternoon is describing a walking tour, not a motorcycle route. What makes this worth a tank of fuel is the river road, the small communities, and the fact that you are riding through a part of the province most riders pass on the highway without ever turning off.

Frequently Asked Questions

Where should I find New Brunswick covered bridges to visit?

Start with current New Brunswick Tourism destination information and the provincial government’s covered-bridge information. Verify each name, location and status before adding it to a route.

How long is the New Brunswick covered-bridge motorcycle route?

There is no single route length. Select confirmed stops, map the road connections using a current routing source, and label the resulting distance and travel time as estimates checked on a specific date.

Can motorcycles cross every covered bridge?

Do not assume so. Check current official information and on-site signs for restrictions. An inventory entry does not establish that a bridge is open to motorcycle traffic.

Are all covered bridges open to visitors?

A listing does not guarantee public access, a safe place to park or current availability. Confirm access with current provincial or local information before riding.

What should I do if a bridge or approach is closed?

Follow posted signs, do not bypass barriers, and use your planned alternate stop or return route.

Sources